Sunday, September 26, 2010

Lab Chemicals



As can be seen above I don't keep large quantities of chemicals and all are labeled. Chemicals are the foundation of most labs and experiments. You will need at least some chemicals to do experiments.

Here is a small list of chemicals that you can collect for your home lab and where you might be able to get them. They will get you started:

G - grocery store
D - drug store
H - hardware store

Acetic Acid - pure white vinegar (G)
Aluminium - foil (G)
Ammonium Bicarbonate - spices (G)
Ammonium Chloride - soldering flux (electronics store)
Ammonium Hydroxide - household ammonia (D,H,G)
Aluminium Sulphate - (gardening store)
Ascorbic Acid - spices (G)
Boric Acid - ant and roach killer (H,G)
Calcium Carbonate - tums, chalk (D)
Calcium Chloride - drying agent (H)
Calcium Hypochlorite - bleaching powder (G)
Calcium Sulphate - plaster of paris (H)
Charcoal - (aquarium store)
Citric Acid - spices (G)
Copper - wire (H)
Copper Sulphate - drain cleaner (H)
Corn Starch - (D,G)
Denatured Alcohol - shellac thinner (H)
Glycerin - glycerol (D)
Hydrochloric Acid - muriatic acid (H)
Iron - steel wool, nails (H)
Manganese Dioxide - black material in regular batteries (D,H,G)
Magnesium Sulphate - epsom salts (D)
Sodium Bicarbonate - baking soda (G)
Sodium Bisulphate - Sani-Flush (H,G)
Sodium Borate - Borax (G)
Sodium Carbonate - washing soda (G)
Sodium Chloride - table salt non-iodized (G)
Sodium Hydroxide - Drano (H)
Sodium Silicate - crystal garden kits (toy store)
Sucrose - table sugar (G)
Trisodium Phosphate - TSP (G)
Turmeric - spices (G)
Zinc - metal found in regular batteries (D,H,G)

Thursday, September 16, 2010

A Lab Vortex




A Lab Vortex

When I was making the centrifuge I had to drill a hole through the center of the spinner bowl. The first time I drilled it was a little off center and it spun slightly off. This had given me an idea for building a lab vortex.

Using another blender that I found, a nut, washer, sponge foam and a juice container cap (from one of the many storage bins I made) I was able to make a lab vortex. I drilled a hole in the juice container cap slightly off center. Made a hole in the foam so that when the nut held the cap in place it would also hold the foam in place to. The washer was used under the cap to slightly raise the cap so it would not rub on the blender.

I want to make the vortex cap better and will experiment on fixing this. I was thinking that maybe a small suction cup may do a better job, but we will see. For the time being it works pretty well.

You can see in the pictures the parts used and the vortex working.