Shaker
 |
Image 1
|
Visiting another second hand store I found this shaker. I have been thinking of making my own for quite sometime and I will still try to make my own at a later date. As can be seen (Image 1) it needed a lot of cleaning outside and in. It worked as is but seemed to struggle to get started. After taking it apart I saw it was full of grime and dirt. Once I cleaned that up it works really well.
 |
Image 2
|
 |
Image 3
|
The platform holds 15 ml conical tubes. The platform comes off very easily so I am going to build different platforms to hold different types of tubes, flasks, beakers and jars. But in the mean time I 3D printed these holders (Image2) for 50 ml conical tubes, 250 ml flasks and 500 ml mason jars. I also printed a yellow tab (Image 3) that fits in the platforms holes to hold these holders in place(Image 4). This is until I can build new platforms to hold each item. I also want to build petri dish holders for it to.
 |
Image 4
|
Again a second hand find turns out real well. You do have to visit many different second hand stores to find something you might need or can use. Many times I do not find anything that I can use, but I see things that gives me ideas of what I might be able to build or use.
